SELVA MARINE MADEIRA 40 Owner's Manual page 15

CONTROL FUNCTIONS
Motor
Hood Hook.
Device to fix the hood. To release it you have to turn the two handles
counter clockwise.
Fuel connector
Inserting the connector you connect the fuel hose.
Trim switches.
(only models with Trim Tilt)
It allows the insertion of the Trim Tilt device directly from the motor.
Steering adjustment screw
(models with Swivel Bracket)
It allows the regulation of the steering tension. If you screw it, the steering
gets harder
Support to lift the motor
To keep the motor in tilt position, turn the support and place it on the
bracket.
Anti-tilt hook
(models with Swivel Bracket)
When the hook is down, the motor is fixed in the navigation position. To tilt
the motor you have to lift completely the hook and rise the motor till the
mechanical stop. To place the motor in the original position you have to
rise the motor, to lower the hook and accompany the motor till the position
of correct trim. The motor will automatically stop in this position.
Picture No. 14
Shock Absorber control lever
Picture No. 15 Rising the lever you can tilt the motor.
It has to be lowered before beginning the cruising.
Picture No. 16
Trim adjustment pin.
It can b inserted in the brackets in different positions allowing a correct
adjustment of the trim.
Directional Skeg
The directional skeg allows to balance the left and right turn efforts. It acts
also as an anode to avoid the electrochemical corrosion of the motor.
Picture No. 17
Picture No. 18
https://www.boat-manuals.com/
13
Picture No. 19
Picture No. 20
Picture No. 21
Picture No. 22