Table of Contents
Advertisement
6.
Operation
6.1.
Safety Instructions for Operation
Attention
This device must be used only for the purposes it is designed for.
This device is intended for professional use as a moving head wash light. It can be installed indoors and
outdoors. This device is not suitable for households and for general lighting.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Attention
Power supply
Before connecting the device to the power supply, make sure that the current, voltage and frequency match
the input voltage, current and frequency specified on the information label on the device.
6.2.
Control Modes
The Polar Wash 740 supports the following control modes:
•
•
Stand-alone:
Auto operation mode (built-in program, custom programs), manual operation
•
•
DMX-512:
HSIC (21 channels), SSP (19 channels), Tour (21 channels), TR16 (28 channels), CMY (22
channels), Pixel (25 channels)
For more information about how to connect the devices, refer to Setup (see
To operate the device manually as a stand-alone device:
Adjust the parameters of the device in the Channel submenu (see
To run the built-in program or one of the custom programs in auto operation mode without a DMX controller:
Select the control mode of the device in the Run Mode menu (see
•
•
If you select AUTO, the device will run the built-in program.
•
•
If you select CUSTOM 1 or CUSTOM 2, the device will run the respective custom program. You can edit the
custom programs in the Edit menu (see
To operate the device with a DMX controller:
01)
01) Select DMX512 as control mode in the Run Mode menu (see
02)
02) Set the DMX starting address (see
menu (see
6.7.1. DMX Address
03) Select the DMX channel mode in the DMX channel mode menu (see
03)
on page 27). Refer to DMX Channels (see
DMX channels.
Note:
The device can be fitted with a wireless module and controlled via wireless DMX. Contact your Highlite
International dealer for more information.
c
6.7.5. Edit
on page 30).
5.3.4. DMX Addressing
on page 27).
6.8. DMX Channels
19
5. Setup
6.7.6.1. Channel
on page 32).
6.7.3. Run Mode
6.7.3. Run Mode
on page 27).
on page 18) of the device in the DMX Address
6.7.2. Person (DMX Channel Mode)
on page 35) for a complete overview of all
Polar Wash 740
on page 16).
on page 27).
Product code: 40106
Advertisement
Table of Contents
