Trane Tracer AdaptiView User Manual page 11

Table 2. Home screen touch targets and buttons
Touch target
Compressor for Simplex chillers
Compressor for Duplex Chillers
Condenser for all chiller models
Evaporator for all chiller models
Motor for Simplex chillers
CTV-SVU01G-EN
Description
This compressor touch target chiller provides information on:
• Compressor Running Status
• Differential Oil Pressure
Touch anywhere on the touch target to view the Compressor component
screen.
This compressor touch target provides information on:
• Compressor Running Status Ckt1
• Compressor Running Status Ckt2
Touch anywhere on the Ckt1 side of the touch target to view the
Circuit 1 Compressor component screen.
Touch anywhere on the Ckt2 side of the tough target to view the Circuit 2
Compressor component screen.
This condenser touch target provides information on:
• Condenser Leaving Water Temperature
• Condenser Entering Water Temperature
• Active Hot Water Setpoint (if Hot Water Control is available)
• Condenser Water Flow Status (animation in graphic indicates if
condenser is running)
Touch anywhere on the touch target to view the Condenser component
screen.
The evaporator touch target provides information on:
• Evaporator Leaving Water Temperature
• Evaporator Entering Water Temperature
• Active Chilled Water Setpoint (if Chilled Water Control is available) or
Active Ice Termination Setpoint in Ice Building mode)
• Evaporator Water Flow Status (animation in graphic indicates if
evaporator is running)
Touch anywhere on the touch target to view the Evaporator component
screen.
The motor touch target provides information on:
• Average line current
• Frequency (if adjustable-frequency drive is configured)
Touch anywhere on the touch target to view the Motor component screen.
P P r r o o d d u u c c t t O O v v e e r r v v i i e e w w
11