2.4
VGA Connector (VGA1) and DVI-D Connector
(DVI1)
VGA1
DVI1
The AIMB-706 includes both VGA and DVI-D interface that can connect display
devices (only VGA interface on VG sku). Pin assignments are detailed in Appendix B.
2.5
Serial Port (COMD1, COMD2, COM3 ~ COM6)
COMD1
COMD2
The AIMB-706 G2 sku offers six serial ports (two on the rear panel and four onboard).
COM3 can be configured as RS-232/422/485 by jumper settings (see Chapter 1),
and selecting the correct device mode for RS-485 under BIOS if necessary (see
Chapter 3). These ports can connect to a serial mouse, printer or communications
network. The IRQ and address ranges for those ports are fixed. However, if you want
to disable the port or change these parameters later, you can do this in the system
AIMB-706 User Manual
COM3
COM4
COM5
COM6
16
VGA
DVI‐D
COMD1, COMD2
COM3 ~ COM6