Material Compatibilities - Cheyenne HAWK Operating Instructions Manual

ATTENTION
Damage to drive caused by fluid
If cleaning fluid or disinfectant gets
inside the drive, this can corrode
the electrical
components.
Never immerse
E
cleaning fluid or disinfectant.
Never use an autoclave or an
E
ultrasonic bath to clean the drive
and the connecting cable.
Pay attention to compatibility of
E
materials when selecting cleaning
agents and
the following chapter "7.1 Material
compatibilities").
7.1

Material compatibilities

Wherever possible, use one of the fol-
E
lowing disinfectants
Manufac-
Product
turer
Big Spray
Antiseptica
'new'
Bode
Bacillol
Chemie
Incidin
Ecolab
Foam
Cheyenne HAWK, HAWK SPIRIT & HAWK THUNDER
and mechanical
the drive
disinfectants (see
Exposure
time
1 to 5 mins
30 s to
1 min
1 to 2 mins
Schülke &
Mayr
Based on the following material com-
patibilities, you can assess which other
cleaning agents and disinfectants are
suitable.
in
However,
E
compatibility in an inconspicuous
location.
The anodized aluminum components of
the tattooing machine are resistant to:
• Weak acids (e.g. acetic acid ≤ 10%,
citric acid ≤ 10%)
• Aliphatic fluorocarbons (e.g. pentane,
hexane)
• Ethanol
• Most inorganic salts and their aqueous
solutions
calcium chloride, magnesium sulfate)
The anodized aluminum components of
the tattooing machine are not resistant
to:
• Strong acids (e.g. hydrochloric acid,
sulfuric acid, nitric acid)
• Oxidizing acids (e.g. peracetic acid)
• Lyes (e.g. caustic soda, ammonia and
all substances with a pH value > 7)
Mikrozid
1 to 2 mins
Liquid
check the material
(e.g. sodium chloride,
47