Checking Equipment - Cheyenne HAWK Operating Instructions Manual

The safety cartridges are supplied
E
in sterile packaging. Do not remove
them from their packaging until
immediately before you intend to
use them.
Always place
E
machine down so that the safety
cartridge is not on it.
Seek medical attention if injured by
E
a contaminated needle.
Switch off the power supply to
E
the tattooing machine.
Insert the
E
the opening in the handle, as
illustrated below.
The safety cartridge only fits in
the opening in two directions.
Rotate the safety cartridge clockwise
E
through approx. 45°.
44
your tattooing
safety cartridge
Cheyenne HAWK, HAWK SPIRIT & HAWK THUNDER
The index (1) marks the position
of the upper (2) or lower part of
the safety cartridge.
Approx. 45°
Check that the safety cartridge is
E
firmly seated.
in
To remove the safety cartridge, turn
E
it anti-clockwise and remove it from
the handle.
5.6

Checking equipment

Conduct a visual inspection of
E
the equipment:
- Are there any visible signs of exter-
nal damage (e.g. bends in the con-
necting cable or bent piston)?
- Are there any exposed cables?
- Are the safety cartridge and
the needles correctly aligned?
Switch on your tattooing machine
E
and conduct a noise test: Can you
hear any unusual operating noises,
or is the unit running loudly?
1