Using The Tattooing Machine; Setting The Needle; Protrusion - Cheyenne HAWK Operating Instructions Manual

If you detect anything unusual,
E
refer to chapters "10 For questions
or problems" and "11.1 Warranty
declaration" on page 50.
If your tattooing machine is no longer
E
operating safely, take it out of service
and consult your local specialist re-
tailer.
6

Using the tattooing machine

6.1 Setting the needle protrusion
CAUTION
Risk of injury
protrusion of needle
A large needle protrusion permits a
deep piercing depth. If needle protru-
sion and piercing depth are excessive,
this can damage the subcutaneous
layer.
Start with just a short length
E
of needle protruding.
Switch on the power.
E
Adjust the needle protrusion while
E
the tattooing machine is switched on;
to do this, turn the handle. Turning
Cheyenne HAWK, HAWK SPIRIT & HAWK THUNDER
from excessive
clockwise increases the protrusion of
the needle:
Max.
Turning counterclockwise reduces
the protrusion of the needle:
Min.
The needle
by approx. 0.1 mm per detent.
Ensure that the index does not turn
E
while you turn the handle.

protrusion

changes
45