Table of Contents
Advertisement
Operation
Advanced functions in the Adjustments menu
The Ambient Light Compensation menu contains
the following items
Name
Min ALC
Max ALC
Low Pass Filter
This function is not available in DVI mode
The display electronics provide 4 different low-pass
User manual CCFD 2320
Description
Contains two functions to set the
minimum point of the ALC control
system:
Measure Min Ambient Light:
Decrease the light in the room to
the minimum possible level you
are likely to work in. Next, execute
this function.
Min Luminance: Adjust this value
until the luminance is at the level
you wish to work with when the
ambient light is at the minimum
level you have set in the above
function.
Contains two functions to set the
maximum point of the ALC control
system:
Measure Max Ambient Light:
Decrease the light in the room to
the maximum possible level you
are likely to work in. Next, execute
this function.
Max Luminance: Adjust this
value until the luminance is at the
level you wish to work with when
the ambient light is at the maxi-
mum level you have set in the
above function.
61
Advertisement
Table of Contents
