Table of Contents
Advertisement
Cleaning
compressed air for a quick and safe removal of dust
particles and other dry contaminants on the surface
of the lcd panel or the glass panel.
Attention: The dust remover contains a liquid gas. If
you shake the can or move the can too fast while
spraying, you may blow drops of liquid on the panel
surface!
If this is the case, clean the panel as described
below.
2. If the LCD panel is dirty or wet, take a lint-free,
nonabrasive cloth and lightly moisten the cloth with a
solution of 25% Isopropyl Alcohol (IPA) and 75% de-
ionized or distilled water. E.g.: Cleareen, a product of
Certified Laboratories.
3. Gently clean the panel with the moist cloth.
4. Take another clean, dry, soft, lint-free cloth and
gently wipe the glass dry.
Cabinet
•
Clean the cabinet using a recognized cleaning
product for medical equipment. The cloth you use
must be moist, not wet!
•
Repeat with water only and wipe dry with a dry cloth.
•
The cabinet has been tested for resistance to the
following products:
Cidex, Betadine, Alcohol (Isopropyl and Ethyl),
Ammonia-based cleaners (Windex) and Aquasonic
Gel.
70
User manual CCFD 2320
Advertisement
Table of Contents
