Table of Contents
Advertisement
Installation
Analog video outputs
Figure 10
Connecting DVI signals: One display:
1. Connect one end of the DVI cable to the DVI input of
the display.
2. Connect the other end of the DVI cable to the DVI
connector of the display controller. If this board has 2
video heads (2 video outputs), connect to Head A.
Connecting DVI signals: Two displays:
1. Connect the left display (when looking at the front
side) to Head A as described above.
2. Connect the second display to Head B.
User manual CCFD 2320
23
Advertisement
Table of Contents
