Barco CCFD 2320 Installation & User Manual page 48

Operation
2. Turn the control wheel to select Settings.
3. Click the control wheel to enter the Settings menu.
4. Turn the control wheel to select Color
Temperature.
5. Click the control wheel to enter the Color Temp
Definition menu.
6. Turn the control wheel to select the User color
temperature.
7. Click and hold the control wheel for approximately
two seconds.
8. When changing the User color temperature, turn the
control wheel to select changing the color
temperature in Kelvin units or x,y co-ordinates.
Confirm the selection by clicking the control wheel.
9. When changing Kelvin units: Turn the control wheel
to change the value.
10. When changing x,y values, first turn the control
wheel to select the x or y value. Then turn the wheel
to change the value. At last, click the wheel again to
confirm the change.
11. Exit the menus.
In Kelvin units, you can change the color temperature
value from 5000 K to 9900 K.
In (x,y) co-ordinates, you can change the values from
0.250 to 0.360.
Note:
When defining a color temperature in x,y co-
ordinates, it may be possible that the target
48 User manual CCFD 2320