Teeter Hang Ups FlexTech Series Assembly Instructions Manual page 17

FIGURE 18
FIGURE 19
STEP 9 Attach the Accessories
Attach the Angle Tether (OPTIONAL)
• The tether will come pre-assembled to the A-Frame.
• Unfold the adjustable tether and clip it to the U-Bar on the underside of the Table Bed
(Figure 18).
• Refer to the Owner's Manual for guidance with pre-setting your angle of rotation.
Attach the Head Pillow (OPTIONAL)
• Attach the Head Pillow by securing the Velcro Straps through the holes in the Table Bed
(Figure 19). The position of the pillow can be adjusted depending on the user.
16