Code Cards For Setting The Orientation - Pepperl+Fuchs PCV F200-R4-V19 Series Manual

PCV...-F200-R4-V19
Appendix
8.1.4

Code Cards for Setting the Orientation

If the alignment of the read head to the code tape does not correspond to the default setting,
the orientation must be adjusted. The orientation can be set at an angle of 0°, 180°, or
automatic detection in 90° increments.
Orientation 0°
Figure 8.13
Orientation 180°
Figure 8.14
Orientation 0° or 180°
Figure 8.15
Orientation 0°, 90°, 180°, or 270°
Figure 8.16
The code card assigns the orientation 0° to the read head.
The code card assigns the orientation 180° to the read head.
The code card automatically assigns the orientation 0° or 180° to the read head.
The code card automatically assigns the orientation 0°, 90°, 180°, or 270° to the read
head.
31