Troubleshooting - Midea FP-92LFC100GMTH-W2 User Manual

MAINTENANCE

Troubleshooting

a solution to the problem. If there is none, contact the service center.
Description
Washing machine
cannot start
Door cannot be
opened
Water leakage
Detergent residues
in the dispenser
Indicator or display
does not light up
Abnormal noise
Alarm indication
Note!
• After checking, turn on the appliance. If the problem occurs again,
contact a service center.
Reason
Door is not closed properly.
Washer's safety protection
design is activated.
The connection between inlet
pipe or outlet hose is not tight.
Detergent is damp or lumpy.
Disconnect the power.
PC board or wire harness
has connection problem.
Reason
Door is not closed properly
Wate
problem during
washing
Draining exceeds time limit.
Water overflow
Others
Solution
R estart after the door is closed
Check if clothes are stuck.
Disconnect the power, restart
the product.
Check and fasten water pipes.
Clean the outlet hose.
Clean and wipe the detergent
box.
Check if the power is shut
down and if the power plug
is connected correctly.
Check if the transport bolts
have been removed
Check if it is installed on a
solid and level oor.
Solution
Restart after the door is closed
Check if the clothes is stuck
Check if the water pressure is
too low.
S traighten the water pipe.
Check if the inlet valve
Check if the drain hose is blocked.
Restart the washer.
Try to look for a solution again
then call for service if none is found
10
2 8
is blocked.