INSTALLATION
water Inlet valve
Drain Hose
Warning!
Warning!
•
Do not kink or protract the drain hose.
• Position drain hose properly ,otherwise damage might result due
to water leakage.
There are two ways to place the end of drain hose:
1.Put it into the floor drain .
Water
trough
Note!
• If the machine has drain hose support, please install it as shown below.
Warning!
• When installing drain hose, fix it properly with a rope.
• If drain hose is too long, do not force it into washing machine as it will
cause abnormal noises.
water supply hose
2.Connect it to the pipe of the
floor drain .
10 11
Connect the other end of inlet
pipe to the inlet valve at the
back of the product and
fasten the pipe tightly
clockwise.
Trough
Hose Retainer
Max.100cm
Min.60cm