Troubleshooting Guide - Midea MFWG7514 User Manual

Front load washer 7.5kg
Table of Contents

Advertisement

TROUBLESHOOTING GUIDE

If the clothes washer does not perform as expected, malfunctions, or an alarm is
sounding, please check the following list of possible solutions.
If a solution can not be found or the problem persists, please contact Midea service (refer
to page 19). Do not, under any circumstance, dismantle the appliance yourself.
Troubles
Washing machine
will not start up
Door will not open
Heating fault
Water leakage
Water overflowing
from bottom of
machine
Indicator or display
does not light
Detergent residue in
the dispenser
drawer
Poor washing effects
Abnormal noises
and vibrations
Reason
· This is the machine's safety
protection.
· Heating element damaged.
· The connection between inlet pipe
or outlet hose and tap or washing
machine is not tight.
· Drain pipe is blocked.
· The inlet hose is not connected
firmly.
· Drain hose has a leakage.
· Power is disconnected.
· PC board has problems.
· Harness has connection problem.
· Washing powder is dampened and
agglomerated.
· The clothes are heavily soiled.
· Insufficient detergent quantity.
· Check if the door is closed tightly.
· Check if power plug is inserted correctly.
· Check if water supply tap is opened.
· Check if button "Start/Pause" is pressed.
· Check if button "Power" is pressed.
· Disconnect the power, wait a few minutes,
door will then open.
· Can only wash without heat.
· Contact the service centre promptly.
· Check and fasten water pipes.
· Clean up outlet hose.
· Arrange a service person to repair if
necessary.
· Fix the inlet hose in place securely.
· Replace the drain hose.
· Check if the power is shut down and power
plug is connected correctly. If not, please
contact customer care.
· Clean and wipe the drawer.
· Use liquid detergents or detergents
especially for front load washers.
· Select appropriate wash program.
· Add the proper detergent quantity according
to instructions on the detergent package.
· Check if the transit bolts have been
removed.
· Check if installed on solid and level floor.
· Check if the feet of the washing
machine are leveled correctly.
· Check for hair clips or metal articles inside
the drum.
17
Solution

Advertisement

Table of Contents
loading

Table of Contents