TROUBLESHOOTING
Please check the following table in case of any abnormal conditions when using the product.
Problem
The scrubber does
not work
Suction power is
weakened
Noise during fan
running
Noise during water
pump running
Floor brush doesn't
have water
Water leaking from
air outlet
Water leakage at
the bottom of the
floor brush
Possible cause
The brush-roll is entangled
●
withhair and other objects
The waste water tank is full
●
Low battery
●
The pipe is blocked
●
Brush-roll, Brush-roll cover,
●
and waste water tank are not
installed properly
The rolling brush is entangled
●
with hair and other objects
The nozzle or pipe is blocked
●
Waste water tank filter is
●
dirty or missing
The nozzle is blocked
●
The clean water tank is lack of
●
water
The clean water tank is not
●
installed in place
The clean water tank is not
●
installed in place
The clean water tank is not
●
installed in place
The machine is in quick
●
suction mode
The waste water tank float is
●
stuck by foreign objects
Waste water tank or waste
●
water tank filter isn't installed
Solution
Clean the brush-roll
Clean up the waste water
tank
Charge
Clean up the pipe under the
waste water tank
Re-install
Clean the rolling brush
Clean up obstacles in the
nozzle or pipe
Clean or install the filter
Clean up obstacles in the
nozzle
Add water to the clean
water tank
Reinstall the clean water
tank
Add water to the clean
water tank
Reinstall the clean water
tank
Press the mode button
once again
Clean up foreign objects at
the float
Install waste water tank and
filter
21