Troubleshooting - Midea MVC-X6 Instruction Manual

Troubleshooting

Please check the following table in case of any abnormal conditions when using the product.
Problem
The scrubber does
not work
Suction power is
weakened
Noise during fan
running
Noise during water
pump running
Floor brush doesn't
have water
Water leaking from
air outlet
Water leakage at the
bottom of the floor
brush
Possible cause
- The rolling brush is entangled with
hair and other objects
- The waste water tank is full
- Low battery
- The pipe is blocked
-Rolling brush, rolling brush cover,
and waste water tank are not
installed properly
- The rolling brush is entangled with
hair and other objects
- The nozzle or pipe is blocked
- Waste water tank filter is dirty or
missing
- The nozzle is blocked
- The clean water tank is lack of
water
- The clean water tank is not
installed in place
- The clean water tank is lack of
water
- The clean water tank is not
installed in place
-
The machine is in quick suction
mode
- The waste water tank float is stuck
by foreign objects
- Waste water tank or waste water
tank filter isn't installed
Solution
- Clean the rolling brush
- Clean up the waste water tank
- Charge
Clean up the pipe under the waste
water tank
- Re-install
- Clean the rolling brush
- Clean up obstacles in the nozzle or
pipe
- Clean or install the filter
- Clean up obstacles in the nozzle
- Add water to the clean water tank
- Reinstall the clean water tank
- Add water to the clean water tank
- Reinstall the clean water tank
- Press the mode button once again
- Clean up foreign objects at the float
- Install waste water tank and filter