Table of Contents
Advertisement
Installing the T811-CM
Verifying CM and AP Operation
2.
Click Security in the left sidebar. The CM web interface displays the Security Status page.
FIGURE 13 Security Status page
3.
Ruckus Wireless recommends that you change the login and/or password as follows:
•
Enter a new CM user ID in Password Change User ID.
•
Enter a new CM user password in New Password.
•
If you are changing the password, then re-enter the new CM user password in Re-Enter New Password.
•
Enter the existing (before change) CM user password in Current User ID Password.
4.
Restore the factory defaults as follows:
•
Select the Restore Factory Defaults Yes button to reset all the CM parameters to the factory default settings after the
next reboot.
•
Select the Restore Factory Defaults No button to prevent a reset all CM parameters to the factory defaults after the
next reboot.
5.
If you have made any changes on the Security Status page, click Apply.
•
If you have selected the Restore Factory Defaults Yes, then the CM reboots and resets all CM parameters to the
factory defaults.
•
If you have selected the Restore Factory Defaults No, then the CM Web interface saves your changes and returns
you to the Security Status page.
Verifying CM and AP Operation
Each cable operator has their own CM and AP acceptance tests. Make sure you verify the T811-CM operation as defined in the
acceptance tests before leaving the installation site.
28
T811-CM Strand-Mount Cable Modem AP Installation Guide
Part Number: 800-71436-001 Rev B
Advertisement
Table of Contents
