Mobius Maxi User Manual page 14

TV Video-Out Full Screen
The Video-Out format parameter can be set to 'Normal' 16:9 or 'Full Screen'. If set to
'Normal', the Video-Out image will be shown in its native 16:9 ratio. Most monitors will
show black bars top and bottom.
If set to 'Full Screen', the Video-Out image will be shown zoomed with the sides
cropped from 16:9 to 4:3.
How the image actually appears on the monitor will also depend on how the monitor
handles the video signal.
This parameter may also be set (and saved) during Video-Out preview as follows:
•
Make sure the image is visible on the monitor.
•
Double-click the Power button to toggle the output between 'normal' and 'full
screen'
WiFi
WiFi functionality may vary slightly depending on which firmware version is installed.
The Android or iOS App must always be the correct version written specifically for the
camera's installed firmware version.
It is important to note the following when WiFi is enabled:
•
When operating the camera using the internal battery WiFi should only be used
for short periods. For example setting the parameters, formatting the card,
aligning the camera, setting the focus etc.
•
WiFi must never be used for FPV RC model control.
•
WiFi consumes approx. 150mA of additional current which results in the camera
generating more heat. Long term use with WiFi enabled is not recommended,
especially in hot environments.
•
If the battery state is too low to establish a WiFi connection the rear LED will
rapidly flash 5 times to indicate that a WiFi connection is not possible.
•
WiFi will be immediately disconnected if a video recording is started with 4K or
2.7K video resolution, even when the 'WiFi Keep Connection' parameter has
been set.
•
WiFi will be immediately disconnected once a video recording is started unless
the 'WiFi Keep Connection' parameter has been set (see 4K or 2.7K video
resolution exceptions above).
•
WiFi will not be turned on when the camera is connected to external power and
the 'Auto Record External Power' parameter set to On.
•
When using the camera without external power WiFi functionality requires a
healthy and charged battery. Failure to do so may lead to unpredictable results
and even random lock-ups.