Advantech ACP-4340 User Manual page 4

4u rackmount industrial chassis with four mobile sata hdd trays
Hide thumbs Also See for ACP-4340:
Table of Contents

Advertisement

16.
CAUTION: The computer is provided with a battery-powered real-time clock cir-
cuit. There is a danger of explosion if battery is incorrectly replaced. Replace
only with same or equivalent type recommended by the manufacture. Discard
used batteries according to the manufacturer's instructions.
(1) Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of
Used Batteries According to the Instructions.
(2) Risque d'explosion si la batterie est remplacée par un type incorrect. Mettre
au rebus les batteries usagées selon les instructions.
17.
THE COMPUTER IS PROVIDED WITH CD DRIVES (or Laser Product). COM-
PLY WITH APPROPRIATE SAFETY STANDARDS INCLUDING IEC 60825-1 or
EN 60825-1.
(1) Avoid direct exposure to the laser beam. Do not open the laser device encl
sure. There are no user serviceable components inside.
(2) Do not operate controls, make adjustments, or perform procedures to the
laser device other than those specified herein.
(3) Allow only authorized service technicians to repair the laser device.
18.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
19.
CAUTION: Always completely disconnect the power cord from your chassis
whenever you work with the hardware. Do not make connections while the
power is on. Sensitive electronic components can be damaged by sudden
power surges.
20.
CAUTION: Always ground yourself to remove any static charge before touching
the motherboard, backplane, or add-on cards. Modern electronic devices are
very sensitive to static electric charges. As a safety precaution, use a grounding
wrist strap at all times. Place all electronic components on a static-dissipative
surface or in a static-shielded bag when they are not in the chassis.
21.
CAUTION: Any unverified component could cause unexpected damage. To
ensure the correct installation, please always use the components (e.g., screws)
provided with the accessory box.
22.
CAUTION: This product is not intended for use by children (this product is not a
toy).
(1) This equipment is not suitable for use in locations where children are likely to
be present.
23.
CAUTION: Improper installation of VESA mounting can result in serious per-
sonal injury! Use suitable mounting apparatus to avoid risk of injury. VESA
mount installation should be operated by professional technician, please contact
the service technician or your retailer if you need this service.
24.
Repair of the device may only be carried out by trained service personnel.
Advantech recommends that a service contract be obtained with Advantech
Service and that all repairs also be carried out by them. Otherwise the correct
functioning of the device may be compromised.
ACP-4340 User Manual/ 用户手册
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
iv

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ACP-4340 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents