Option Configuration - Wiznet WIZ127SR User Manual

4.1.3.

Option Configuration

You should set to UART configuration after checking UART tab whether it is UART0 or UART1.
The numbers on the screenshot correspond to the descriptions listed below.
1) Device name
The device name is displayed in this area.
2) Serial number
The serial number of device is displayed in this area.
3) Password
The password that is used for web configuration and telnet is displayed in this area. The shown
password is encrypted by MD5.
If you want to change the password, double-click the text-box and then type your password in
ASCII codes.
WIZ127SR User's Manual
Figure 7. Configuration Tool (Option Configuration)
29