Huawei OptiX OSN 9560 Quick Installation Manual page 47

2
Common Engineering Labels
Name Content
MN (BC)— -48 V1
Labels for MN (BC)— -48 V2
power cables
MN (BC)— BGND
MN (BC)— PGND
Labels for MN
external
alarm cables
Labels for MN-A-B
network
cables
Labels for
inter-device MN-A-B-C-D
fibers
MN-A-B-C-D
Labels for
fibers
between the
device and
ODF frame
ODF-MN-A-B-C
Example
To:
A01 — -48 V2
B08
A label on the loaded
A label on the power
cabinet side that distribution cabinet side that
contains information
contains information about the
about the position of a
position of a cable on the
cable on the power loaded cabinet side.
distribution cabinet
A01-02-01- -
A01-A-04-L4G-OUT
A01-A-04-L4G-IN
44
MN (BC): BC is written right
under MN.
On the loaded cabinet side:
To:
"MN" identifies the row and
B03 — -48 V2
column numbers of the power
distribution equipment such as
the control cabinet and cable
distribution box. "BC" identifies
the row and column number for
the -48 V wiring terminal.
BGND and PGND cables are
not assigned rows or columns
for identification.
On the power distribution
cabinet side: Only MN is
required to identify the cabinet
number.
M: Equipment rows from front
to back are numbered from A to
Z.
N: Equipment columns from left
to right are numbered from 01
to 99.
MN: cabinet number
A: subrack number. two digit
numbers running from top to
bottom.
B: network port number.
Network ports are numbered
from up to down and from left
to right with two digits.
MN: cabinet number
A: subrack number. two digit
numbers running from top to
bottom.
B: slot number
C: board number
D: optical port number
MN: cabinet number
A: subrack number. Two digit
numbers running top to bottom.
B: slot number
C: board number
D: optical port number
MN: row number and column
number of the ODF frame
A: ODF plug-in frame number
B: terminal row number
C: terminal column number
Description