• Power cable connections
NOTE
Thread subrack power cables through the cable distribution plate and bind the cables with binding straps. The
cable layout guidelines specify that power cables should be routed along the side panel inside the cabinet. If
the OptiX OSN 9560 shares a cabinet with the OptiX OSN 3500, you need to connect cables for four 63 A
power inputs, four 63 A power outputs, two 32 A power inputs, and two 32 A power outputs.
B
Cable distribution plate
Subrack power board
Subrack
power board
B
A
15
A
Power input area
63 A 63 A 32 A 63 A 63 A 32 A
B
Power output area
Power output
port for the
OptiX OSN 9560
Power output port for the
OptiX OSN 3500