Cleaning Modes - LG VCARPETX Owner's Manual

Zigzag Cleaning
In 'Zigzag Clean' mode, Robot Cleaner repeats a
zigzag operation to clean every and each spot in the
cleaning area.
If you need to quickly clean an area choose 'Zigzag
Clean' mode.
Press 'Mode' button on Remote Controller or main
unit to select 'Zigzag Clean' mode and press 'Start'
button.
※ Factory release default setting is 'Zigzag Clean.'
Cell by Cell Cleaning
In 'Cell by Cell' mode, Robot Cleaner cleans the
area by dividing it into rectangular spaces.
For meticulous cleaning, select this mode.
Press 'Mode' button on Remote Controller to select
'Cell by Cell' mode and press 'Start' button.
The 1st stage:
The maximum outline of 3 m x 3 m of cleaning
area will be cleaned. (The size of the outline may
vary in accordance with the shape of the area to
be cleaned.)
The 2nd stage:
The 2nd stage of Cell by Cell cleaning engages a
Zigzag mode automatically.
When the 1st, 2nd stages are completed, the
cleaned area will be cleaned through the repetition
of the above cleaning method as the device is being
moved to the next part of cleaning area.
Tip
• Once set up, the cleaning mode(Zigzag, Cell by Cell) setting will be maintained even after
the power supply is turned off.
• During operation, if a mode change is required, press the STOP button and then select the
mode. Cleaning will then start from the beginning.

CLEANING MODES

19