Supervisor Level; Opening The Supervisor Level; Access Via Code; Change Code - Miele PDR 908 HP Operating And Installation Instructions

Opening the supervisor level



Programs
Touching the  sensor control takes
you to the supervisor level.

Access via code

The supervisor level is accessed using
a code.
Factory default: The code is 000.

Change code

You can alter the supervisor-level
access code to protect the tumble
dryer from unauthorized access.
Carefully enter a new code.
Please inform Technical Service if
you have forgotten your new code.
Technical Service will have to reset
the code.
Make a note of your new code and
store it in a safe place.
 
Favorites Supervisor
Help

Closing the settings menu

11:02
 Touch the  sensor control.
The display will then go back to the
previous menu level.
 Touch the  sensor control.
The display will change to the main
menu.

Controls / Display

Language

The display can be set to appear in
one of several different languages. To
select the language you want, go to
the Languages sub-menu.
You can change the language as
follows:
– Permanently using the supervisor
level (= "Supervisor language").
– For the duration of the current
program only using the  sensor
control. The supervisor language is
displayed again at the end of the
program.

Supervisor level

87