Room Ventilation; External Control Equipment - Miele PDR 908 HP Operating And Installation Instructions

Room ventilation

– Air drawn in for use in the drying
process will be warm when it is
expelled back into the room. You
must therefore ensure that the room
is sufficiently ventilated, particularly if
the dryer is located in a small room.
– Make sure that the room temperature
is not too high. If there are other
heat-producing appliances in the
room in which the dryer is located,
make sure the room is well ventilated
and switch the other appliances off.
Otherwise running times and energy
consumption could be increased.
Installation and connection

External control equipment

The XCI box accessory is needed to
connect external control equipment,
such as payment systems or peak-load
control units.
Payment system
This tumble dryer can be equipped with
a payment system (optional Miele
accessory). Therefore Miele Technical
Service needs to program a setting in
the dryer's electronic and connect the
payment system.
Coins/tokens must be removed from
the coin box regularly. Otherwise, the
payment system will become blocked.
83