Miele PDR 908 HP Installations Plan
Heat pump tumble dryer
Hide thumbs
Also See for PDR 908 HP:
- Operating and installation instructions (108 pages) ,
- Operating and installation instructions (108 pages) ,
- Operating and installation instructions (108 pages)
Related Manuals for Miele PDR 908 HP
Summary of Contents for Miele PDR 908 HP
- Page 1 Installation plan Heat pump tumble dryer PDR 908 HP en-AU, NZ It is essential to read the operating and installation instructions before installation and commissioning. This prevents both personal injury and damage to the appliance. 11 276 500/05...
- Page 2 Freemans Bay Auckland 1011 New Zealand Telephone: 0800 4 MIELE (0800 464 353) www.miele.com.au/professional professional.sales@miele.com.au Miele Global Headquarters: Miele & Cie. KG Carl-Miele-Straße 29, 33332 Gütersloh, Germany Legend: Connection optional or required, Connection required depending on model Exhaust air Cooling air intake...
-
Page 3: Appliance Dimensions
PDR 908 HP en-AU, NZ Appliance dimensions * The wall spacers are recommended for making service work easier. The machine may be pushed against the wall if installation conditions mean there is limited space. 11 276 500/05... -
Page 4: Installation
PDR 908 HP en-AU, NZ Installation * The wall spacers are recommended for making service work easier. The machine may be pushed against the wall if installation conditions mean there is limited space. 11 276 500/05... -
Page 5: Washer-Dryer Stack
PDR 908 HP en-AU, NZ Washer-dryer stack * The wall spacers are recommended for making service work easier. The machine may be pushed against the wall if installation conditions mean there is limited space. 11 276 500/05... - Page 6 PDR 908 HP en-AU, NZ Installation * The wall spacers are recommended for making service work easier. The machine may be pushed against the wall if installation conditions mean there is limited space. 11 276 500/05...
-
Page 7: Technical Data
31.7 A n c h o r i n g ( B ) Anchoring of Miele plinths Miele plinth installation (fasteners included) Required anchor points Wood screws according to DIN 571 8 x 65 Wall plugs (diameter x length) - Page 8 PDR 908 HP en-AU, NZ Technical data PDR 908 HP A p p l i a n c e d a t a Overall appliance dimensions (H/W/D) 850/605/777 Casing dimensions (H/W/D) 850/596/737 Site-access dimensions (H/W) Min. site-access opening (excl. packaging)
- Page 9 After initial gap of at least 3 mm in the isolator switch (including circuit breakers, commissioning, changes may only be made by your Miele dealer or fuses, and relays according to AS/NZS 3000).
- Page 10 Plinth installation The tumble dryer can be installed on a plinth (open or box plinth, available as an optional Miele accessory) or on a concrete plinth to be provided on site. The quality of the concrete and its strength must be assessed according to the machine load.