Seat Adjustment - Sakai SW884 Operator's Manual

2.1.5 Fuse box and line fuse
WARNING
When changing a fuse, cut the power supply by
turning the Starter switch to the
Fuses protect electrical components and wiring from
burning. Change any fuse which has become powder-
coated due to deterioration or which has play between it
and fuse holder. To replace fuses, take off the cover. Be
sure to use fuses of correct capacity.
Using improperly rated fuses may result in poor machine
performance, damage to the electrical system, or safety
problems, such as an electrical fire (refer to page 117).
2.2 Handling and Adjustments

2.2.1 Seat adjustment

Adjust the seat for your best operating position. Move
the lever as shown by arrow. With the lever held in that
position, slide the seat forward or backward as desired.
When properly adjusted, release the lever.
Adjust your seat position to suit you as follows:
1) Pull the lever ① and adjust seat position longitudinally.
2) Turn the backrest adjust pull the lever ② for optimum
angle.
3) Move the suspension lever ③ to select suitable
suspension for your body weight.
20A
15A
position.
Cover
Cover
– 41 –
2 OPERATION
20A
15A
20A
5A
10A
15A
10A
5A
10A
15A
30A
5A
20A
30A
Fig_04
5A
Fig_05
②
①
②
③
30A
15A