Water Spray System - Sakai SW884 Operator's Manual

2 OPERATION

2.6 Water Spray System

1) Before turning the spray system on, check level in
the water tank with the sight gauge. Add water as
necessary.
IMPORTANT
Use clean water wherever practicable.
2) Select or AUTO position of the Spray mode selector
switch.
position : Spray system can be controlled by the
blue button on the F-N-R lever
position : Spray system is shut off
AUTO position : Spray system is actuated when
the F-N-R lever is in the forward or
reverse position and deactivated
when the F-N-R lever is moved to the
Neutral position
3) Select water pumps for front and rear drums.
Two each of same water pumps are installed to front
drum and rear drum spray system. There are three
positions at each switch.
PUMP1 position : Actuate pump 1
Center position : Actuate pump 1 when select intermittent spray (see 4)
Actuate pump 1 and Pump 2 when deselect intermittent spray (see 4)
PUMP2 position : Actuate pump 2
Spray mode selector switch
– 66 –
Level gauge
Water filer port
AUTO
TIMER
PUMP1
BOTH
PUMP1 PUMP1
PUMP2 PUMP2
FRONT REAR
PUMP PUMP