Removing The Jet Wipe; Removing The Case And Floor Panel - 3D Systems Cubify Cubex Manual
Measuring stepper motor chip voltages
Hide thumbs
Also See for Cubify Cubex:
- Replacement manual (13 pages) ,
- Replacement manual (17 pages) ,
- Manual (10 pages)
Table of Contents
Advertisement
Before beginning this process please ensure that all cartridges have been
removed from the machine.
Removing the Jet Wipe
Run the bed to the bottom of the machine using manual move.
Lift Jet wipe out of the machine
Removing the Case and floor panel.
Using the 3mm hex driver remove the 8 case bolts (4 either side of the machine).
Unplug the CubeX screen.
4
Advertisement
Table of Contents
Need help?
Do you have a question about the Cubify Cubex and is the answer not in the manual?
Questions and answers