Table of Contents
Advertisement
DC disconnector
Data communic-
ation area
Modbus terminal
WSD (wired shutdown) switch
The DC disconnector has 3 switch set-
tings:
(1)
Locked/off (turned to the left)
(2)
Off
(3)
On
IMPORTANT!
In switch settings (1) and (3), a conven-
tional padlock can be used to secure
the inverter against being switched on/
off. The national guidelines must be
complied with in this respect.
Push-in terminal for the installation of
Modbus 0, Modbus 1, 12 V and GND
(ground).
The data connection to the connected
components is established via the
Modbus terminal. The inputs M0 and
M1 can be selected for this purpose.
Max. 4 Modbus participants per input,
see chapter
Modbus participants
page 93.
Defines the inverter as a WSD primary
device or WSD secondary device.
Position 1: WSD primary device
Position 0: WSD secondary device
on
33
Advertisement
Table of Contents
