Controlling The Device - Televes T.OX Series User Manual

6. - Controlling the Device

This version of the Twin Modulator allows
configuration and monitoring via a PC, both locally
and remotely.
a. Local control
The "Headend Management" programme (v2.14
or higher) is required, as well as a special cable
(provided with the programme) that connects a PC
serial port to the Twin Modulator "PRGM" socket.
The programme can be used to set up and read all
the operating parameters of the device.
b. Remote control
It is necessary to have a Headend Control module
(ref. 5559 or 555901) that includes the programme
mentioned above, and the corresponding modem
connected to a phone line.
Once the communication with the headend
control has been established, all the controllable
devices that have been installed in the headend
can be accessed. In this case it is essential that each
element be programmed with a different device
address between 1 and 254.
Menu structure
AOUTPUT
Channel: C21
(471.25 MHz)
Level: 99
ACHANNELS
Channel Tab:
CCIR N.Z.Ind
Long press
AVIDEO
VMD: 68.5%
FAud: 5.5MHz
AAUDIO
S. Dev.: 7
PictS 1: -16
PictS 2: -18
AMODE
Audio Mode:
Mono
TestMode OFF
CONFIG
Adr CDC: 001
TEMPERATURE
Now: 03
Max: 04
reset
Vers. FW.
V:x.xx
Vers. Boot
V:x.xx
LANGUAGE
English
En cualquier momento se puede cambiar
entre el módulo A y B pulsando las teclas
y encima de la indicación A/B en las
esquina superior izquierda.
19
EN