Twin Modulator
4.3. Broadband amplifier
1
2
3
4
It has two signal input connectors, to allow the
mixture of the channels provided by two systems.
If only using one of the inputs, it is recommended
to load the unused input with a load of 75 ohm, ref
4061.
TEST
(-30dB)
5
PWR
6
7
It has an output connector and a test socket (-30
dB) located in the upper part of the front panel.
1. RF output
2. Test socket (-30dB)
3. RF input
4. RF input
5. Powering BUS connectors
6. Status LED
7. Gain attenuator
The power supply is achieved with 24V, through a
cable that is the same as that used to supply power
for the system's other modules.
12