Table of Contents
Advertisement
6. - Controlling the Device
This version of the Twin Modulator allows
confi guration and monitoring via a PC, both locally
and remotely.
a. Local control
The "Headend Management" programme (v2.14
or higher) is required, as well as a special cable
(provided with the programme) that connects a PC
serial port to the Twin Modulator "PRGM" socket.
The programme can be used to set up and read all
the operating parameters of the device.
b. Remote control
It is necessary to have a Headend Control module
(ref. 5559 or 555901) that includes the programme
mentioned above, and the corresponding modem
connected to a phone line.
Once the communication with the headend
control has been established, all the controllable
devices that have been installed in the headend
can be accessed. In this case it is essential that each
element be programmed with a diff erent device
address between 1 and 254.
Menu structure
Long press
At any moment, modules A and B can be
switched by pressing keys
the cursor is over the A/B indication situa-
ted on the upper left corner.
19
EN
and
when
Advertisement
Table of Contents
