Table of Contents
Advertisement
19
6. - Controlling the Device
Menu Structure
This version of the COFDM-QAM CI allows
confi guration and monitoring via a PC, both locally
and remotely.
a. Local control
EN
The "Headend Management" programme (v2.14
Long press
or higher) is required, as well as a special cable
(provided with the programme) that connects a PC
serial port to the COFDM-QAM CI "PRGM" socket.
The programme can be used to set up and read all
the operating parameters, as well as to monitor the
correct operation of the device.
b. Remote control
It is necessary to have a Headend Control module
(ref. 5559 or 555901) that includes the programme
mentioned above.
Once the communication with the headend
control has been established, all the controllable
devices that have been installed in the headend
can be accessed. In this case it is essential that each
element be programmed with a diff erent device
address between 1 and 254.
Advertisement
Table of Contents
