Connect the LinPAC-5000 and Windows PC
The port is located on the right-upper corner on the LinPAC-5000. It is a
standard RS-232 serial port, and it provides TxD, RxD, GND,
non-isolated.
Start HyperTerminal by clicking on
'Start
Programs
Accessories
Communications
Hyper
Terminal'
In the 'COM properties' dialog box, please set for 115200 bits per
second, 8 data bits, no parity, 1 stop bit and no flow control to set up
the communication parameters for the COM1 port, and press 'OK' when
done.
ICP DAS
- 3 -