ICP DAS USA LinPAC-5000 Quick Start Manual page 5

Connect the LinPAC-5000 and Linux PC
Install HyperTerminal tool in Linux PC such as minicom, gtkterm, etc.
Take minicom as an example, please refer to the following steps:
Type 'minicom -s' to configure COM1 port, and press down and select
'Serial port setup'.( please set for 115200 bits per second, 8 data bits,
no parity, 1 stop bit and no flow control to set up the communication
parameters for the COM1 port). Finally, press 'Exit'.
ICP DAS
- 5 -