Setting Up Of Port Transmission - Compex SGX3224 Quick Install Manual

Setting up of Port Transmission Mode
1.
Move your PC mouse's cursor and point it to the port that you want to
change the transmission mode.
Click the port and the following dialog box will come out:
2. You can now change the transmission mode by clicking the small down
pointing arrow beside "Speed/Duplex" box. It will show you the
transmission modes that you can select for that port. Normally, it will look
like this:
For a 10/100 port, it will have the following selection "Auto", "10Mbps HD
(half duplex)", 10Mbps FD (full duplex)", "100Mps HD (half duplex)",
"100Mbps FD (full duplex).
3. You can also enable/disable this port by selecting at the "Port State" box.
12 Compex 24 - Port All 10/100 Management Switch
(SGX3224, SGX3224 PLUS)
English