Download Print this page
Axxess GMLAN-AMP-01 Installation Instructions
Axxess GMLAN-AMP-01 Installation Instructions

Axxess GMLAN-AMP-01 Installation Instructions

General motors lan amplifier interface

Advertisement

Quick Links

GMLAN-AMP-01
* IMPORTANT WARNING
THIS PRODUCT INCLUDES INSTRUCTIONS FOR INSTALLATION WHICH
MUST BE CAREFULLY FOLLOWED. THE INSTRUCTIONS ARE WORDED
IN SUCH A MANNER TO ASSUME THAT THE INSTALLER IS CAPABLE
OF COMPLETING THESE TYPE OF ELECTRONIC INSTALLATIONS.
IF YOU ARE UNCLEAR AS TO WHAT YOU ARE INSTRUCTED TO DO OR
BELIEVE THAT YOU DO NOT UNDERSTAND THE INSTRUCTIONS SO AS TO
PROPERLY AND SAFELY COMPLETE THE INSTALLATION YOU SHOULD
CONSULT A TECHNICIAN WHO DOES HAVE THIS KNOWLEDGE AND
UNDERSTANDING.
GMLAN-AMP-01
GENERAL MOTORS
LAN AMPLIFIER INTERFACE
GMLAN-AMP-01
INSTALLATION INSTRUCTIONS
The GMLAN-AMP-01 is designed to allow the user to add
a 2 channel or monoblock amplifier to the GM vehicles
listed below that are equipped with the digital amplified
sound system. These vehicles have a 2 channel fixed out-
put at the radio which traditional line level convertors
cannot use. The GMLAN-AMP-01 will provide a non-fad-
ing output and provide a 12 volt turn on for the aftermar-
ket amplifier.
* READ IMPORTANT WARNING ON PAGE 1
BEFORE ATTEMPTING ANY INSTALLATION
APPLICATIONS
GMC
CADILLAC
Escalade
2007
Yukon XL / Denali 2007
Escalade ESV
2007
HUMMER
H2
2008
Escalade EXT
2007
INTERFACE COMPONENTS
• GMLAN-AMP-01
• OEM Radio to GMLAN-AMP-01 "T" Harness

Advertisement

loading
Need help?

Need help?

Do you have a question about the GMLAN-AMP-01 and is the answer not in the manual?

Questions and answers

Summary of Contents for Axxess GMLAN-AMP-01

  • Page 1 INSTALLATION INSTRUCTIONS OF COMPLETING THESE TYPE OF ELECTRONIC INSTALLATIONS. The GMLAN-AMP-01 is designed to allow the user to add IF YOU ARE UNCLEAR AS TO WHAT YOU ARE INSTRUCTED TO DO OR a 2 channel or monoblock amplifier to the GM vehicles...
  • Page 2 If after setting the amplifier gain properly the output is still too low or high, you can increase/decrease the level at the GMLAN-AMP-01. Locate the potentiome- ter on the GMLAN-AMP-01 which is next to the 10 way Molex plug. Turn the radio on and use a small Phillips or Flathead screwdriver turn the potentiometer up or down to adjust the level up or down.