Nic Indicator Codes; Power Supply Unit Indicator Codes - Dell EMC VxRail P Series Owner's Manual

NIC indicator codes

Each NIC on the back panel has indicators that provide information about the activity and link status. The activity LED indicator indicates if
data is flowing through the NIC, and the link LED indicator indicates the speed of the connected network.
Figure 9. NIC indicator codes
1. link LED indicator
2. activity LED indicator
Table 9. NIC indicator codes
Status
Link and activity indicators are off
Link indicator is green and activity indicator is blinking
green
Link indicator is amber and activity indicator is blinking
green
Link indicator is green and activity indicator is off
Link indicator is amber and activity indicator is off
Link indicator is blinking green and activity is off

Power supply unit indicator codes

AC power supply units (PSUs) have an illuminated translucent handle that serves as an indicator and DC PSUs have an LED that serves as
an indicator. The indicator shows whether power is present or a power fault has occurred.
Figure 10. AC PSU status indicator
1. AC PSU status indicator/handle
Table 10. AC PSU status indicator codes
Power indicator codes
Green
Blinking amber
Not illuminated
Blinking green
12 Overview
Condition
A valid power source is connected to the PSU and the PSU is operational.
Indicates a problem with the PSU.
Power is not connected to the PSU.
When the firmware of the PSU is being updated, the PSU handle blinks green.
Condition
The NIC is not connected to the network.
The NIC is connected to a valid network at its maximum port speed and
data is being sent or received.
The NIC is connected to a valid network at less than its maximum port
speed and data is being sent or received.
The NIC is connected to a valid network at its maximum port speed and
data is not being sent or received.
The NIC is connected to a valid network at less than its maximum port
speed and data is not being sent or received.
NIC identify is enabled through the NIC configuration utility.