Repair 220-2 And C-220 Cutting Assembly - Fellowes 220-2 Technical & Service Manual

DO THIS FIRST
Remove Cutting Assembly
Gears
TOOLS
Philips screwdrivers
20
Repair 220-2 and C-220 Cutting
Assembly
To remove or replace the stripper shrouds, strippers,
and cutting shafts:
1
Remove the 4 screws and lock washers that hold
the distance shafts to the right bearing plate.
2
Remove the 4 screws and washers that hold the
distance shafts to the left bearing plate.
3
Remove the right bearing plate.
4
Slide the distance shafts out of the cutting
assembly.
5
Pull up and out on the stripper shrouds and
remove them from the cutting shafts.
6
Remove the 2 screws that hold the journal bearing
insert to the right bearing plate.
7
Push the cutting shaft assmblies toward the right
bearing plate and push the journal bearing inset
out of the opening.
8
Remove the strippers from the cutting shafts.
9
Slide the cutting shaft assemblies through the
opening in the left bearing plate.
10
Replace cutting assembly components as needed.
220-2 and C-220 cutting
shaft assemblies