Cabinet And Housing; Replace Caster Assembly - Fellowes 220-2 Technical & Service Manual

Cabinet and Housing

The cabinet consists of the cabinet with four casters, a
housing cover, and a wastebasket drawer. The interior
of the cabinet has a shelf that supports the mechanical
and electrical components. A housing cover fits on the
cabinet.
The Auto/On and Manual Forward switches and the
LED indicators are located on the housing cover. Paper
is fed through the paper feed slot (throat) on the cover.
220-2/220C-2
cabinet door

Replace Caster Assembly

The caster assembly screws into a threaded socket on
the bottom of the cabinet.
1
Remove the wastebasket.
2
Select a suitable work surface and put a blanket,
mat, or other cover down to prevent damage to
the shredder.
3
Lay the shredder on its
side on the blanket.
4
Turn the nut clockwise to
remove the caster from
the bottom of the cabinet.
5
Replace the old caster
with a new one.
wastebasket
bolt
nut
caster
Cabinet
220-2 and C-220 housing cover
CD feed slot (220-2 & C-220 only)
paper feed slot
(throat)
troubleshooting
lights
operator
panel
casters (4)
DO THIS FIRST
Unplug the Shredder
TOOLS
Wrench
13