Safety and Notice The AV-GM09Q3-S1 5x1 HDMI Switch has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, AV-GM09Q3-S1 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
Page 3
Introduction The AV-GM09Q3-S1 provides easy switching among 5 HDMI sources to your high definition display including HDMI equipped or DVI enabled monitors. Full digital and high quality video/audio from any of these 5 sources can perfectly be transmitted to the connected high definition monitor via IR remote control or front panel button.
Panel Descriptions Front Panel 1. Power indicator LED 5. Input 3 LED indicator 2. IR receiver 6. Input 4 LED indicator 3. Input 1 LED indicator 7. Input 5 LED indicator 4. Input 2 LED indicator 8. Input select push button Rear Panel +5V DC 8.
3. Connect your HDMI/DVI enabled receiver (monitors etc.) into the output port of AV-GM09Q3-S1. 4. Power up AV-GM09Q3-S1. 5. Select the input you want to be displayed on the connected monitor with IR remote control or push button on the front panel.
Limited Warranty The SELLER warrants the AV-GM09Q3-S1 5x1 HDMI Switch to be free from defects in the material and workmanship for 3 years from the date of purchase from the SELLER or an authorized dealer. Should this product fail to be in good working...
Page 11
Support For more info or tech support http://www.siig.com/support April, 2018...
Need help?
Do you have a question about the AV-GM09Q3-S1 and is the answer not in the manual?
Questions and answers