SIIG AV-GM09G3-S1 User Manual

SIIG AV-GM09G3-S1 User Manual

5x1 hd/sd-sdi switch

Advertisement

Quick Links

5x1 HD/SD-SDI Switch
P/N: AV-GM09G3-S1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AV-GM09G3-S1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SIIG AV-GM09G3-S1

  • Page 1 5x1 HD/SD-SDI Switch P/N: AV-GM09G3-S1...
  • Page 2 However, like all electronic equipments, the AV-GM09G3-S1 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
  • Page 3 INTRODUCTION AV-GM09G3-S1 receives, equalizes, and reclocks* up to 8 SDI inputs, perfectly switches the desired input to SDI equipped monitors or receivers. The switch supports both HD/SD-SDI rates, re-transmitted quality is guaranteed. Through RS-232, IR remote, or front panel push button, the control of the SDI switch becomes versatile and easier.
  • Page 4 ● 1 x AV-GM09G3-S1 / AV-GM09J3-S1 / AV-GM09G3-S1 / AV-GM09K3-S1 ● 1 x IR remote controller ● 1 x 5V power adapter ● 1 x User Manual SPECIFICATIONS Model Name AV-GM09G3-S1 AV-GM09J3-S1 AV-GM09G3-S1 AV-GM09K3-S1 Technical 8x2 matrix Role of usage...
  • Page 5 Storage temperature -20~60C [-4~140F] Relative humidity 20~90% RH [no condensation] The measurement results are from Tektronix VFM-700 with SDI through 1m (3.3ft) long Belden 1694A. PANEL DESCRIPTIONS Front Panel Chosen input channel LED Input channel auto detection LED Output HD/SD detection LED IR remote receiver Power indicator LED Push button for input channel switch...
  • Page 6 RS-232 control port for PC control Synchronized signal loop-out (add 75 terminator if not connect) 5V DC power jack Synchronized SDI signal input SDI output SDI input...
  • Page 7 HARDWARE INSTALLATION 1. Connect SDI enable equipments to the output of AV-GM09G3-S1. 2. Connect the SDI input sources to the inputs of AV-GM09G3-S1. 3. Plug power adapter cable into 5V DC power jack. 4. Use IR remote, RS-232, or front panel push button to switch between input channels.
  • Page 8 Also, the technical information contained herein regarding the AV-GM09G3-S1 features and specifications is subject to change without further notice. Support For more info or tech support http://www.siig.com/support...

This manual is also suitable for:

Av-gm09j3-s1Av-gm09k3-s1

Table of Contents