Advertisement
1. Setting up the PDS-8x1
Before updating the MiniOS7, please ensure that the PDS-8x1 module is connected with your host
computer. Refer to the following steps for the details.
Step 1: Switch off the Power to the PDS-8x1 module.
Step 2: Connect the DB-9 connector of CA-0910 download cable to your host computer.
Step 3: Wire the CA-0910 to PDS-8x1 module, as follows:
3-1: Connect the
3-2: Connect the
3-3: Connect the
Host PC
CA-0910
MiniOS7 Update via 7188XW.exe (Ver. 1.0/Sep. 2018)
CA-0910.TX
with
PDS.8x1.TxD
CA-0910.RX
with
PDS.8x1.RxD
CA-0910.GND
with
PDS.8x1.GND
GND
Vs+
Power Supply
Page: 1
Advertisement
