Advertisement
Step 9: Connect both the PDS-8x1 module and your computer to the same sub network or the
same Ethernet Switch.
Step 10: Install the
your Host PC, and then run the Utility
to search for any PDS-8x1 module
connected to the nework.
Download the VxComm Utility.
Step 11: Configure the correct network settings for the required PDS-8x1 module.
Please refer to "Chapter 3-Configuring Network Settings" in the PDS-8x1 Quick Start Guide. If the IP address
settings do not work correctly, please refer to
Download the Quick Start Guide.
MiniOS7 Update via 7188XW.exe (Ver. 1.0/Sep. 2018)
VxComm Utility
on
note2 (Page
8).
Page: 6
Advertisement
