Specifications - Toro Z Master Commercial TURBO FORCE 3000 Series Operator's Manual

Choke Control
Use the choke to start a cold engine. Pull the choke
knob up to engage it. Push the choke knob down to
disengage it (Figure 6).
Blade-Control Switch (Power
Takeoff)
The blade-control switch (PTO) engages and
disengages power to the mower blades
Ignition Switch
Use this switch to start the mower engine. It has 3
positions: S , R , and O
TART UN
Motion-Control Levers
Use the motion-control levers to drive the machine
forward, reverse, and turn either direction.
Neutral-Lock Position
Use the N -
EUTRAL LOCK
safety-interlock system to engage and to determine
the N position.
EUTRAL
Fuel-Shutoff Valve
Close the fuel-shutoff valve (under the seat) when
transporting or storing the mower.
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
(Figure
.
FF
position with the

Specifications

Note:
Specifications and design are subject to
change without notice.
Width
Without Deck
Deflector Up
Deflector Down
6).
Length
Roll Bar Up
Roll Bar Down
Height
Roll Bar Up
179.1 cm (70.5 inches)
Weight
Model
75936
14
134.6 cm (53.0 inches)
156.8 cm (61.7 inches)
192.2 cm (75.7 inches)
211.1 cm (83.1 inches)
215.4 cm (84.8 inches)
Roll Bar Down
127.8 cm (50.3 inches)
Weight
589 kg (1,298 lb)