Positioning The Flow Baffle - Toro Z Master Commercial TURBO FORCE 3000 Series Operator's Manual

Positioning the Flow Baffle

The following figures are only recommendations
for use. Adjustments vary by grass type, moisture
content, and the height of the grass.
Note:
If the engine power draws down and the
mower ground speed is the same, open up the baffle.
Position A
This is the full rear position. The suggested use for
this position is as follows:
•
Short, light grass mowing conditions
•
Dry conditions
•
Smaller grass clippings
•
Propels grass clippings farther away from the
mower
Figure 36
Position B
Use this position when bagging. Always align it with
the blower opening.
Figure 37
Position C
This is the full open position. The suggested use for
this position is as follows:
•
Tall, dense grass mowing conditions
•
Wet conditions
•
Lowers the engine-power consumption
•
Allows increased ground speed in heavy conditions
g005832
g005833
29
Figure 38
g005834