Cooling System Maintenance; Cleaning The Engine Screen And Engine-Oil Cooler; Cleaning The Engine-Cooling Fins And Shrouds - Toro Z Master Commercial TURBO FORCE 3000 Series Operator's Manual

Cooling System
Maintenance
Cleaning the Engine Screen
and Engine-Oil Cooler
Service Interval: Before each use or daily
Remove any buildup of grass, dirt, or other debris
from the oil cooler (Figure
Figure 75
Before each use, remove any buildup of grass, dirt, or
other debris from the engine screen. This will help
ensure adequate cooling, correct the engine speed,
and will reduce the possibility of overheating and
mechanical damage to the engine
75).
(Figure 75).
Cleaning the
Engine-Cooling Fins and
Shrouds
Service Interval: Every 100 hours/Yearly (whichever
1. Disengage the blade-control switch (PTO) and
engage the parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Remove the air-intake screen, the recoil starter,
and the fan housing
4. Clean the debris and grass from the engine
parts.
5. Install the air-intake screen, the recoil starter,
and the fan housing
g029644
g009191
1. Engine guard
2. Engine air-intake screen
3. Bolt
51
comes first)
(Figure 76).
(Figure 76).
Figure 76
4. Fan housing
5. Screw
g004218